The Wireless Charging Module requires a minimum input voltage of 5 volts/1.5 amperes. For fast charging powers of 7.5 W and 10 W, an adapter with a minimum output of 9 volts/1.67 amperes is required. To optimize the fast charging function, we recomme
No. The Wireless Charging Module is an inductive charging station that must be connected to a 5V/1.5A power source.
The Wireless Charging Module is supplied with a USB-A/USB-C cable (50cm). For direct connection to the motorcycle battery or E-bike motor, we offer the Cable Wireless Charger.
No. For technical reasons, the SPC+ Phone Case cannot be used with the Wireless Charging Module. Charging your smartphone with the Wireless Charging Module is only possible in combination with the SPC Phone Case.
For the direct connection of the Wireless Charging Module to your motorcycle battery or E-bike motor, we offer the Cable Wireless Charger.
No. Since these are different systems, the Wireless Charging Module is unfortunately not compatible with the Cable 6V DC or the Cable 12V DC. For the direct connection of the Wireless Charging Module to the motorcycle battery or E-bike motor, you nee
Compared to its predecessors, all Apple devices from the iPhone 12 series onwards feature a design according to Apple MagSafe. With this design, inductive charging is only possible to a limited extent. If your Apple MagSafe iPhone is not charging whe
If you have connected the Wireless Charging Module to a power source and your smartphone is not charging, only 4 factors could be responsible for this. 1) You are using an iPhone model from the iPhone 12 series or newer. In this case, please refer to