Charging Anti Vibration Module
With which mounts is the Charging Anti Vibration Module SPC+ compatible?
You can use the Charging Anti Vibration Module SPC+ with the following SP Connect mounts:. If you already own one of these mounts, you do not need any additional adapter for installation. Here you can find the LINK to the manual. With the following m
I connected my Charging Anti Vibration Module SPC+ to a power source, but it doesn’t seem to be working. What can I do?
If you have connected the Charging Anti Vibration Module SPC+ to a power source and your smartphone is not charging, there are only three possible causes:. Please first make sure that the connector is supplying power at 5V/2A and check all interfaces
With which cables can I use the Charging Anti Vibration Module SPC+?
The Charging Anti Vibration Module SPC+ is designed for use with the following cables:. USB connection. Direct 12V connection. If you already have the classic SPC 12V HARD WIRE CABLE installed on your motorcycle, it is compatible with the Charging An
My smartphone seems to charge too slowly with the Charging Anti Vibration Module SPC+. Why is that and what can I do?
My smartphone seems to charge too slowly with the Charging Anti Vibration Module SPC+. Why is that and what can I do?. Our SPC+ charging solutions provide wireless charging with up to 15 watts. However, the actual charging speed can vary due to sever
What power requirements does the Charging Anti Vibration Module SPC+ have?
The Charging Anti Vibration Module SPC+ requires a minimum input of 5 volts / 2 amps. For fast-charging performance of 7.5 W and 10 W, an adapter with at least 9 volts / 1.67 amps is required. To optimize fast charging, we recommend using a Quick Cha
How do I attach the Charging Anti Vibration Module to my SP Connect motorcycle mount?
The Charging Anti Vibration Module is easily installed by replacing the head of the respective mount. Simply insert the damping module into the mounting ring, tighten the screw to 5 Nm, and you're ready to go!You can find the manual at this LINK .
I want to connect the Charging Anti Vibration Module directly to my motorcycle battery. What do I need for that?
The Charging Anti Vibration Module and the included USB-C/USB-A cable do not contain a voltage converter. For a direct connection to a battery, you need the Cable 12V DC. We recommend connecting this cable to the ignition’s positive terminal to avoid
Can I use the classic SPC Phone Case with the Charging Anti Vibration Module?
Unfortunately, no. The classic SPC Phone Case can only be attached to the Charging Anti Vibration Module using the SPC Adapter. However, the distance created by the adapter between the smartphone and the charging surface prevents inductive charging.
Can the cable connector be adjusted independently of the positioning of the Charging Anti Vibration Module?
Unfortunately, it is not possible to orient the cable connector independently of the position of the Anti Vibration Module. For technical reasons, the cable is designed as a fixed part of the mount, and an alternative construction is currently not po
Can I cut the included USB cable and connect the Charging Anti Vibration Module directly to my motorcycle battery?
No, the included USB-A cable is not suitable for direct connection to a motorcycle battery or an e-bike motor. It does not contain any voltage converters that regulate the power to the level required by your smartphone. For a safe direct connection,
Can I use the Charging Anti Vibration Module with SP Connect Universal solutions?
No, the Charging Anti Vibration Module can only be used in combination with a designated SP Connect Phone Case. The SP Connect Universal solutions are not compatible with the Wireless Powerbank due to their construction. They create an unavoidable te
Does the Charging Anti Vibration Module continue to draw power after the smartphone has been removed?
Yes, the Charging Anti Vibration Module continues to draw a small amount of power even after the smartphone has been removed, as it does not have an on/off switch for technical reasons. This minimal standby power consumption has no noticeable impact
Why should I use the Charging Anti Vibration Module on my motorcycle?
Modern smartphones are highly advanced — but unfortunately also increasingly sensitive, especially when it comes to camera technology. Continuous engine vibrations can cause damage to optical image stabilization or other delicate components. This is
Is the Charging Anti Vibration Module a Mag-Align mount?
Yes!. The current Charging Anti Vibration Module in our online store is equipped with Mag-Align technology. A precisely engineered magnetic ring surrounds the mount interface and automatically guides your smartphone into the optimal position on our p
Why do I need the Charging Anti Vibration Module if almost all SP Connect motorcycle mounts already have integrated damping?
With the exception of the Brake Mount, Mirror Mount, and Moto Mount LT, all SP Connect motorcycle mounts feature an integrated damping system in the head of the mount. This system is specifically designed to absorb shocks and impacts caused by uneven
Is the Charging Anti Vibration Module compatible with my classic SPC motorcycle mount (with straight rails)?
Yes, the Charging Anti Vibration Module is fully compatible with your classic SPC motorcycle mount with straight rails.The interface between the Charging Anti Vibration Module and the mount is identical, so no additional adapters are required. Instal